10.0.0.1 – Login Admin

0
30
10.0.0.1

Default logins for 10.0.0.1

User name: admin
Password: password

How to login in 10.0.0.1

Follow these simple steps to log into your Router with an 10.0.0.1ip address.

  1. Connect the router cable to your computer. (You can also use a wireless network). Make sure the device is connected to the Wi-Fi network.Extra Tip – It is recommended to use a wired connection when making any changes to the router. This avoids the risk of being disconnected when clicking the Save button.
  2. Open your browser of choice and enter the router’s IP address in the address bar. You can find the IP on the back of your router box. If that doesn’t work, get the router’s instruction manual. The IP listed as Default Gateway is the correct one.
  3. Now enter your router’s default username and password to access the admin panel. ‘You can try the login credentials below. The default values ​​for admin are:root | user | adminIf none of the above works, type your router name into your browser to find the default username and password. You will be redirected to the desired model configuration page, where you can manage network and router settings.

Troubleshooting 10.0.0.1

If you can’t log into your router, you’re probably typing in the wrong username or password. Also, remember to make a note of both after changing the default values.

  • Forgot Login Password? Try restarting your router. To do this, press and hold the small black button on the back of your router for about 10 seconds. This will reset your router to factory settings.
  • Router login page not loading? If the login page is not loading, make sure your device is connected to the Wi-Fi network. You can also check if your router’s IP address that is set as default is correct.
  • Some pages may not load or may be slow. In this case, your network is probably using a different IP address. If this happens, check our router IP address list and locate the correct address. If you need help with this, check out our tutorial on how to find your router’s IP address.

Brands using 10.0.0.1

  • Arrive
  • Aztech
  • Cisco
  • I Connect
  • Intelbras
  • RF Net
  • smc
  • Technicolor

IP adddress FAQ

1. What is 10.0 0.1 ?

10.0.0.1 is the default IP address. The IP address always contains 4 sets of numbers ranging between 0 and 255. This is because each device connected to the internet is supposed to have a unique address. So, the first three sets are the network id, and the last set is the device id. In 10.0.0.1 the network id is 10. and the device id is .0.1


2. How to log in to 10.0 0.1 / How to login to 10.0 0.1 / How to use 10.0 0.1

First, type 10.0.0.1 in your browser’s address bar. Then, enter username and password, and then click OK or Login.


3. What are the (most common) default logins for 10.0 0.1 ?

The most common default logins for 10.0.0.1 IP address are Username: admin , Password: admin


4. What is the (most common) default username for 10.0 0.1 ?

The most common default username for 10.0.0.1 address is admin


5. What is the (most common) default password for 10.0 0.1 ?

The most common default password for 10.0.0.1 address is admin


6. 10.0 0.1 – How to Access Router IP Address?

First, type 10.0.0.1 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN.
The most common default logins to access 10.0.0.1 are – username: admin , password: admin


7. How to login into 10.0 0.1 / Hot to go to 10.0 0.1 / How to use 10.0 0.1

First, type 10.0.0.1 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN.
The most common default logins to access 10.0.0.1 are – username: admin , password: admin

Leave a Reply